Wash or decontaminate your hands. (Risk assess PPE according to local policy).Depending on the commode, you will need approximately 3-5 wipes. Should your wipe dry out or become soiled, replace it with a new wipe.To activate, wet the wipe with warm water under a tap or dip into a bucket. Squeeze out the wipe to remove excess water.Remove the seat cover and wipe the top in an ‘S’ shaped pattern. Repeat on the underside and leave to air dry, allowing sufficient contact time with the disinfectant.Unclip and remove the backrest. Wipe the front and back of the rest in an ‘S’ shaped pattern from top to bottom. Leave to air dry on a clean, dry surface.Remove and wipe arms. Leave to air dry on a clean, dry surface.Remove seat and wipe in an ‘S’ shaped motion. Repeat for the underside and leave to air dry on a clean, dry surface.Remove the bedpan rack and carefully clean both sides. Leave to air dry on a clean, dry surface.Clean the remaining frame from top to bottom. Then, unclip the footrests and clean thoroughly. Leave both to air dry on a clean, dry surface.Wipe the underside of the wheels, leaving to air dry and then leave all parts to air dry to allow the disinfectant enough contact time to work.Dispose of cleaning wipes as per local protocol.Remove PPE, wash or decontaminate hands and if required complete a record of cleaning. When fully dry, carefully reassemble the commode.
