Wash or decontaminate your hands and put on PPE (risk assessment to ensure appropriate PPE is worn, as per local protocol).
Always wipe surfaces from clean to dirty
Approximately 2-3 wipes will be required to clean a PAT Slide.
Start at the top of the board and wipe in an ‘S’ shaped pattern down the front and each side.
Leave the board to air dry, then repeat the process on the other side.
Leave the PAT Slide to air dry, allowing sufficient contact time with the disinfectant.
Dispose of cleaning wipes as per local protocol.
Remove PPE, wash or decontaminate hands, and if required complete a record of cleaning as per your local protocol.